How to choose the right type of fence for me?
Do you need a fence, that will provide security, privacy or aestethics?
This is very urgent. Requirement - To barricade the complex mini substation 4 x 3m palisade panels x 2m height 1 x 1, x 1.2 palisade gate razor 10m razor wire We will supply the materials. I just need someone to provide us with a quotation for labour. email address :
Mounted on a precast wall. See picture attached.
20m x 20m (total 80M) concrete palisade with razor wire on top. The height of the palisade should be 2.4 meters high. Metal sliding gate (6m x 2.4m) . Location: Tooseng, Lebowakgomo.
I want palisade fencing installed. I am available on Whatsapp call, message and email. I can arrange pick up of the material, just need someone to give me a quote for the supply.
I would like a quote for an electric fence. I am not sure of the dimensions around the fence
Simple and plan
Item Description 1 Palisade Fencing - .4 linear meters (49.6m x 31.6m x 49.6m x 31.6m) Acquisition of the materials and items - 2 Meters 60 x 60mm x 2 – 2.5mm steel angle iron with 2.5mm width. - 2.5 Meters 76 x 76 x 1.6mm square poles tubes with 2.5mm width. - 60 x 60 x 2 – 2.5mm top and bottom crossing steel angles. - Security padlock for the gate - Welding or casting of the locking mechanisms at the gate. 2.2 Height of the fence - The height of the fence must be two (2) Meters from the ground - Length of the poles must be 2.5 Meters - mm of the 76 x 76 x 1.6mm poles must be dig or excavated into the ground with concrete. - Poles must be 2 meters away from each other. 2.3 Spacing of the poles and angles. - Spacing in between the 60mm angles must be approximately mm. - The 60 x 60 x 2 – 2.5 mm angle iron must have industrial spike on top. - 70mm poles must be covered and closed with the palisade cap. 2.4 Sliding Gate of the palisade fencing - Size of the gate must be 3 Meters wide and slide. - The gate must be fitted with the 60 mm angle iron track. - The sliding track must be fitted with the stop at the end. - The sliding angle iron must have an allowance of 3.5 meters on one side to enable full slide of the gate. - Gate must be installed to enable sliding. - Must have sliding wheels. - Mechanism to lock and protected lock. - Provide security padlock with three (03) keys. 2.5 Painting of the fence - First coat : Prime coat (black or red) - Second coat: Enamel Paint Blue 2.6 Locking mechanisms - Make a mechanism to enable the fitting of padlock - Provide a security padlock 2.7 Crossing angle iron - Slotted channel must be used for the crosses. - Crossing slotted angle iron must be 60 X 60 x 2- 2.5mm - Crossing angle iron must be welded firmly. 1.8 Size and the construction of the palisade fencing Size of the palisade fencing shall be 49.6m x 31.6m x 49.6m x 31.6m and will be constructed around the prefab building.
I would like to know cost with supply and installation. I would like to find out about flat wrap. There are different diameters in the flat wrap. I was thinking of 2 of the .